ESTIMATOREDGE
How many invitations did you pass on last quarter?

Every RFP your team can't get to is a job someone else wins.

Your estimators are buried in drawings and specs, so some of the work you're invited to never gets a bid at all, and you never see what it was worth. EstimatorEdge reads each RFP, builds the scope, and prices a first draft from your own rate table, so your estimators' time goes to winning bids instead of reading every page of every RFP.

Bid on more of the work you're already invited to.

Get access now Book a call Set up for you during onboarding
review.estimatoredge.com
Scope review
Millbrook Community Center · Mechanical Upgrade
These items were extracted by AI and may contain mistakes. Check each one against the actual RFP before confirming.
New Condensing Boiler 1
800 MBH, with primary/secondary hydronic piping
Confirmed
Rooftop HVAC Unit 1
ENERGY STAR certified, serves gymnasium
Confirmed
Kitchen Fire Suppression
NFPA 17A certification required
Outside capability

Every hour your estimator spends decoding a 200-page RFP is an hour taken from your next bid.

Every bid starts with the same slow read

Hours spent finding the scope items, the addenda, the one line that changes everything, buried on page 47.

Addenda get missed.

It happens under deadline pressure. An addendum sits inside a 200-page document, and one missed line changes a price.

Bidding on more work takes more reading time than most teams have

The read-and-draft work is what caps how many jobs you can go after in a month.

From RFP to costed proposal, with your estimator in control the whole way

Nothing gets priced or sent until your estimator has looked at it. The AI does the reading, your team makes the call.

  1. 01

    Submit the RFP

    Upload the document. Processing starts right away, and timing varies with the size and complexity of your RFP.

  2. 02

    It gets read and qualified

    Checked against your capabilities, with the scope items and addenda extracted.

  3. 03

    Your estimator reviews it

    Confirm what's accurate, correct anything that isn't. Nothing moves forward without this.

  4. 04

    Get a drafted proposal

    Costed against your own rates, ready for final sign-off.

See it run on a sample RFP

One bid, start to finish: the RFP goes in, your estimator reviews the scope, and a drafted proposal lands in the inbox.

Bid. An RFP that fits the company's capabilities. 4 min
Two other outcomes
Partial FitPart of the scope is outside what the company does
No-BidThe RFP is far outside the company's work

All demos use sample RFPs created for testing. No client documents are shown.

Built so the estimator stays the expert

EstimatorEdge takes over the slow reading and the first draft. Every judgment call stays with your team.

Your estimator confirms every item

Nothing is priced or sent until each item is ticked and confirmed. Anything the AI got wrong is corrected on the review page before costing starts.

Work outside your capabilities is flagged on the review page, and your estimator makes the final call

Items your company does not perform, or lists as exclusions, are marked on the review page so the estimator decides what to include and how.

Costed from your own rate table

Pricing comes from the rates loaded during setup. Items without a matching rate are listed as unpriced for your estimator to price.

Built for the trades

The review page groups every RFP by trade, so each estimator sees the work that belongs to them first.

Mechanical

Rooftop units, boilers, hydronic piping, startup and commissioning

Electrical

Disconnects, feeders, panels and devices

Plumbing

Fixtures, domestic water, drainage and gas

Controls / BAS

Building automation and system integration

Fire Protection

Suppression, sprinklers and alarm work

Sheet Metal

Ductwork and duct modifications

And other trades. Contact us or book a call to see if EstimatorEdge is a fit for yours.

Founding Partner pricing, held for the life of your subscription

Open to the first 10 clients only. After that, the rate goes up for everyone who joins later, permanently.

Founding partner rate · 10 spots only

Get started

$500 per month, held for the life of your subscription
Rises to $800/month once the first 10 spots are filled
Plus a one-time $1,000 setup fee to onboard your rate table and capabilities.
  • Your rates and capabilities, set up for you
  • Unlimited RFP submissions
  • AI-assisted scope review, drafted proposals
  • Your estimator confirms every item before anything sends
Claim a founding partner spot

By continuing to payment you accept the Terms and Privacy Policy.

Prefer to talk first? Book a call

Questions contractors ask

What is EstimatorEdge?
EstimatorEdge reads each RFP your company receives, checks it against your capabilities, extracts the scope items and addenda, and drafts a costed proposal from your own rate table. Your estimator reviews and confirms every item before anything is priced or sent.
Which trades does EstimatorEdge work for?
The review page groups scope by trade, including mechanical, electrical, plumbing, controls and BAS, fire protection and sheet metal. For any other trade, contact us or book a call to see if EstimatorEdge is a fit.
How much does EstimatorEdge cost?
The Founding Partner rate is $500 per month for the first 10 clients, held for the life of your subscription, plus a one-time $1,000 setup fee. After the first 10 spots are filled, the rate rises to $800 per month. The plan is month to month.
Does the AI decide what goes in my bid?
No. The AI reads the RFP and lists the scope items. Your estimator ticks the items the company will bid on, confirms or corrects each one, and submits. Items left unticked stay out of your costing and your proposal.
What if the RFP is outside what we do?
Every RFP is checked against your stated capabilities. If it is far outside your work, you receive a No Bid notice with the reasoning and the RFP attached. If only part of it is outside, those items are flagged on the review page and your estimator chooses what to do with them.
Where do our rates and project data live?
Each client has a separate private database for rates, projects and proposals. One company's data is never mixed with another's.
What do we upload, and how long does it take?
You upload the RFP as a PDF. The scope email follows as soon as processing finishes, with timing that scales to the size and complexity of your RFP. After your estimator submits the review, the costing and the drafted proposal follow by email.
How long does setup take?
We load your capabilities and rate table for you during onboarding. The one-time setup fee covers this work, and we'll confirm the timeline with you by call or email.
Is there a contract?
The plan is month to month. One thing to know in advance: the Founding Partner rate is held for the life of your subscription, and it does not carry over if you cancel and return later.
Does it replace our estimator?
No. It removes the reading and the first draft, so your estimator spends time on judgment and pricing decisions instead of hunting through a 200-page document.

Talk to us

Book a call and we'll walk you through the workflow and how it would fit your company, or send a message and we will reply by email.

Book a call

Pick a time that suits you and we will walk through the system together. The scheduler is loading, or you can email us to book.

Email to book a time

Send a message

We reply by email, usually within one to two business days.